If you have purchased a Hoselink watering accessory but do not have the compatible Hoselink fitting on the end of your hose, adapt using a 3/4" male click on thread.
Watch the video for a demonstration:
A watering accessory can include sprayers, sprinklers, wands or any other watering implement.
Steps:
Set aside the Hoselink accessory connector that came with your watering product:
Replace with a 3/4" male click on thread
Screw the 3/4" male click on thread into the base of your watering accessory & connect to your hose.
Note:
Hoselink does not sell or provide click on fittings with our products. They are a common part that can be purchased from all hardware stores or re-purposed from another product in your garden.
Our recommendation for a leak free solution is to replace the click on fitting on the end of your hose with a Hoselink Hose Connector (or Hose Connector with Flow Control).