You can connect just about anything to our no-burst, no-leak fittings.
Any watering accessory or device with a screw thread can be attached for a watertight connection. When accessories have a click-on fitting that cannot be removed, simply connect to it using our Click-on Adapter Set.
A watering accessory can include sprayers, sprinklers, wands or any other watering implement.
Taps
Learn how to connect to various size taps, tap connections & recycled water taps.
Common Tap Sizes
There are two common tap sizes found in Australia: 1” and ¾” BSP thread size.
The Hoselink Universal Tap Connector will fit either size via the included size reducer.
The size reducer should be used with the 3/4" tap size or removed for the 1".
Recycled Water Taps
Recycled water taps are designed with a reverse thread. By first attaching Hoselink’s Recycled Water Tap Adapter, standard hose connectors can then be attached to the recycled water tap
Hoses
Hoselink’s Hose End Connectors are suitable for fitting on to most hoses and come in three sizes:
Residential: to suit a 12mm & 14mm internal diameter. Most household garden hoses are 12mm in internal diameter. These can be purchased HERE
Commercial: to suit an 18mm hose. 18mm diameter hoses are typically used in rural and commercial applications and provide a higher water flow rate than standard 12mm hoses and fittings. These can be purchased HERE
Note: External diameters will vary depending on the type of hose you’re using, as well as the quality
Sprinklers & Sprayers
How to Connect
There are 2 ways to connect a sprinkler or sprayer:
Use can use a Hoselink Accessory Connector with most watering accessories. Unscrew & set aside the attachment fitting on your watering accessory. Replace with the Hoselink Accessory connector & attach to your hose.
If you find that your product has a moulded or glued in fitting, you will need a Click-on Adapter Set to adapt.
Pressure Washers
How to Connect
Hoselink fittings are compatible with Gerni, Karcher and other brands of pressure cleaners to ensure a secure and stable connection between the hose and machine.
All pressure cleaners are different, so at the water inlet unscrew the ‘click-on style’ fitting to check whether the machine has a male or female thread. Then:
If you have a male thread, use a universal tap connector, for a watertight fitting. This is typical with the Gerni and Karcher brand of pressure washers.
If you have a female thread, use an Accessory Connector, for a watertight fitting.
Alternatively, you can use a click on adaptor set, although this is not the recommended method for a leak free solution.
Fertiliser Bottles
How to Connect
There is only one way to connect ready-made fertiliser bottles such Yates Weed’n’Feed and other liquid hose-on products.
The Click-on Adapter Set will connect your Hoselink hose to the ‘click-on style’ connection on the bottle.
FAQ's
I bought a Hoselink watering accessory, how do I attach it to my hose?
Hoselink accessories are compatible with your non Hoselink hose, with the right connector. If you have recently bought a Hoselink watering accessory & cannot attach to your hose, reference this article to resolve